Looking for a good cleaning project? You can’t go wrong with your garage. Erase clutter and give it a fresh look to help you get a state of organization in your life.
Cleaning the garage is a rewarding task. Plus, the results are impressive. Consider the wall of the garage as a way to beautify it and get rid of dirt and grime effectively.
Garage walls can get super grimy. Plus, they can provide shelter for household pests.
To help minimize these risks and improve your warranty, read our guide on how to clean garage walls to make your home look its best. Read along to learn more!
Ensure Safety
Start by clearing the area. Remove all items from the surface, such as tools, boxes, and any chemicals. Wear protective equipment, including goggles, gloves, and a facemask.
Ensure proper ventilation. Set up a fan to blow fumes away from you. Add a drop cloth to the floor to protect against streaks and spills.
Mix the cleaning garage walls solution in a bucket and use an extension pole to reach high walls. Rub the walls with a sponge or brush in a circular motion. Rinse it with a power washer or cloth.
Allow items to dry before replacing them. Finally, properly dispose of all materials. By following these steps, you will ensure safety and clean your garage walls like a pro!
Use the Proper Cleaner Solution
The most important thing to consider is the type of walls you have. Most garages with nonporous surfaces, such as concrete, will require a different solution than walls made with other materials. It is essential to determine the material before selecting a cleaner.
Then, the best cleaner should be selected. For concrete, a mild pH-neutral detergent might be appropriate. For walls that are sensitive to water, such as those made with drywall or plaster, a detergent-free coating is preferable.
It is also important to note that some agents can cause discoloration or, worse, damage to the material. Therefore, test a small area with the proposed cleaner before applying it to the entire wall.
Finally, correct protective wear, such as gloves, glasses, and breathing masks, should be equipped when cleaning surfaces.
Use Protective Gear
Before getting started with your project, wearing protective gear is an important part of renovating your garage. When cleaning, it is crucial to wear protective glasses, heavy-duty rubber gloves, and a face shield to protect the eyes and face from dust, paint chips, and other debris.
Additionally, long pants and closed-toe shoes should protect your legs and feet from sharp objects that may be present in the garage. After putting on the appropriate gear, use a vacuum, broom, or damp cloth to remove dirt and dust from the walls. If painting is necessary, use a dust mask to avoid inhaling paint particles.
Avoid Damaging the Paint
Start by ensuring that there is no dust or debris with a soft brush before scrubbing. Use only gentle and non-abrasive detergents, soaps, and sponges on painted walls. Do not apply too much pressure to the walls when scrubbing or cleaning, as this can wear off the paint.
Start scrubbing from the bottom of the wall and move up to avoid gouging out the paint or pushing it around. After scrubbing, rinse the walls with a garden hose or a scrub brush attached to a bucket to remove any soap residue.
Allow the area to air dry. Any cracks, holes, or other imperfections can be painted before the wall is completely dried.
Use Mop
Start by pouring some warm water into a bucket and then adding a mild solution such as laundry detergent or dish soap. Next, dip the mop head into the solution and wring it out until it’s damp. Make sure to cover the entire mop head in the solution.
Then, begin to wipe it from the top to the bottom in a downward motion. Make sure to cover the entire area of the wall, using a sweeping motion.
Finally, hang the mop head to dry after each use to avoid spreading germs and bacteria. Following these simple steps will help ensure your walls are left looking spotless and sparkling clean in your garage!
Use Broom
Start by filling a bucket with warm water and adding an all-purpose solution. Dip the cloth or sponge in the water, wringing out excess water before applying it. Start from the top and make horizontal or vertical strokes as you move down.
Once it is covered, use a dry cloth to wipe off any remaining moisture. Make sure to work in small sections and rinse the cloth or sponge regularly to prevent buildup.
Don’t forget to use protective eyewear and rubber gloves to protect your skin from any harsh chemicals. Finally, be sure to let it air dry before replacing any items on the wall.
Use Damp Cloth or Sponge
Start by filling a bucket with warm water and adding an all-purpose solution. Dip the cloth or sponge in the water, wringing out excess water before applying it. Start from the top and make horizontal or vertical strokes as you move down.
Once it is covered, use a dry cloth to wipe off any remaining moisture. Make sure to work in small sections and rinse the cloth or sponge regularly to prevent buildup.
Don’t forget to use protective eyewear and rubber gloves to protect your skin from any harsh chemicals. Finally, be sure to leave it to air dry before replacing any items on the wall.
Learn How to Clean Garage Walls Today!
With these tips, you can keep your walls looking as clean as possible. Now that you’re an expert on how to clean garage walls, get out there and make them look new! Don’t forget to enlist the help of cleaning materials, as safety is key.
If you find this helpful and want to read more great content, check out our latest blog posts now!